Skip to content
MTBF / MTTR CALCULATOR BY SYMESTIC

MTBF / MTTR Calculator

Use this MTBF / MTTR calculator to determine the mean time between failures (MTBF), mean time to repair (MTTR), availability and failure rate of your equipment – and see instantly where downtime costs you the most.

Display MTTR / MTTD
MTTR is often under an hour – switch to minutes if needed.
Reliability data
Observation period, failures and downtime – the basis for MTBF, MTTR and availability.
Observation period
hrs
Planned operating time, e.g. 700 h/month
Number of failures (breakdowns)
pcs
Unplanned failures within the period
Total downtime / repair time
hrs
Sum of all downtime caused by failures
Uptime 690hrs
Advanced & economics (optional)
Detection time for MTTD and downtime cost for the €-based assessment.
Total detection time
hrs
Optional – unlocks MTTD
Cost per hour of downtime
EUR
Margin / lost contribution margin per hour of downtime
Currency
! No uptime: the downtime meets or exceeds the observation period. MTBF and availability are 0 – please check your inputs.
AVAILABILITY
Rating

MTBF
hrs
MTTR
hrs
MTBF
hrs
Uptime ÷ failures · mean operating time between failures, higher = more reliable
MTTR
hrs
Mean repair time per failure · lower = faster
Failure rate
–/ 1,000 h
Failures per operating hour · = 1 / MTBF
MTTD
–hrs
Mean time to detect a failure
Breakdown of the observation period
How your planned operating time splits into actual production and downtime.
Uptime
Downtime / repair time
Cross-check: availability = MTBF / (MTBF + MTTR) = uptime / observation period (mathematically identical).
Values per observation period
Loss in the period
Savings per −1 hr MTTR
Savings per avoided failure
€
What is downtime costing you?
Enter the cost per hour of downtime on the left to see your loss and the €-levers per failure.
Availability rating
Public rating bands for inherent availability.
Needs improvement < 90 %
Average 90–95 %
Good 95–99 %
Excellent ≥ 99 %
Industry-specific MTBF/MTTR targets are only shown with verified platform data – we do not claim generic target figures.
Recommendations
Share & export your result
Your inputs are stored in the link – no account, no backend.

Please enter the observation period, number of failures (≥ 1) and downtime to calculate MTBF, MTTR and availability.

A free tool from SYMESTIC – Manufacturing Execution System from the cloud.
HOW THE CALCULATOR WORKS

Quick guide: calculate MTBF & MTTR in 3 steps

From three inputs, the tool instantly calculates MTBF, MTTR, availability and failure rate. Here is how to proceed:

1

Capture the observation period

Enter the equipment's planned operating time for the period – e.g. 700 hours per month. Planned stops such as maintenance or changeovers do not count as downtime.

2

Enter failures & downtime

Record the number of unplanned breakdowns as well as the sum of the resulting repair and downtime.

3

Read & assess the result

MTBF, MTTR, availability and failure rate appear instantly. Optionally, detection time (MTTD) and downtime cost per hour reveal the €-loss and the biggest levers.

The formulas at a glance
MTBF Uptime ÷ failures Mean operating time between two failures of a repairable asset. Higher = more reliable.
MTTR Repair time ÷ failures Mean time to fix a failure. Lower = back in production faster.
Availability MTBF ÷ (MTBF + MTTR) Inherent availability – the share of time the equipment is operational.
Failure rate λ 1 ÷ MTBF Number of failures per operating hour, often shown per 1,000 hours.
MTTD Detection time ÷ failures Mean time to detect a failure – part of the total downtime.
All metrics consider unplanned failures only – planned maintenance and changeover times are deliberately left out so the values are not distorted.
FREQUENTLY ASKED QUESTIONS

MTBF, MTTR & availability – frequently asked questions

Terms, formulas and practical tips on the reliability of your equipment.

MTBF (Mean Time Between Failures) is the mean operating time between two unplanned failures of a repairable asset. It is calculated as uptime ÷ number of failures. A higher MTBF value indicates a more reliable asset.

MTBF applies to repairable systems that keep running after a repair. MTTF (Mean Time To Failure) applies to non-repairable components that are replaced after a failure. MTBF looks at the operating time between failures, MTTF at the time until a single failure.

MTTR (Mean Time To Repair) = sum of all repair times ÷ number of failures. A low MTTR value means faults are fixed quickly and the asset is back in production fast.

MTTD (Mean Time To Detect) is the mean time until a failure is even detected. It is part of the total downtime – the faster the detection, the sooner the repair can begin and the lower the MTTR.

Inherent availability = MTBF ÷ (MTBF + MTTR). It rises when MTBF grows (fewer failures) or MTTR drops (faster repair). Mathematically, this also equals uptime ÷ observation period.

This depends heavily on the industry, asset type and criticality. As a general rule, availability of 99 % and above is considered excellent and 95–99 % good. Binding targets can only be derived from the real data of your own equipment – blanket industry figures are rarely reliable.

The failure rate λ is the reciprocal of MTBF (1 ÷ MTBF) and indicates the number of failures per operating hour. Because the value is very small, it is usually shown per 1,000 hours.

No. MTBF and MTTR consider unplanned faults only. Planned maintenance or changeover times do not belong in the downtime – otherwise the metrics are distorted.

At least three values: the observation period (planned operating time), the number of failures and the total downtime. Detection time (for MTTD) and downtime cost per hour (for the €-based assessment) are optional.

MTBF rises through preventive maintenance, root-cause analyses and eliminating recurring fault causes. MTTR drops through spare-part stocking, standardized repair procedures (standard work) and faster fault detection.