WHITEPAPER · OEE
OEE Essentials: calculate OEE correctly and improve it
The guide explains each OEE factor with its formula, the causes of loss and one worked example that runs through the whole document.
Download the guide

What is inside
You learn how to calculate availability, performance and quality, how to combine OEE for several machines without distorting it, where TEEP helps and how to raise OEE on your shop floor.
- Formulas for availability, performance, quality and OEE with one worked example
- OEE across several machines, TEEP and five common calculation errors
- Measures that raise OEE, from downtime reasons to shorter changeovers
SYMESTIC, the cloud-native MES, connects machines of any type and age via digital signals or OPC UA and records stops, quantities and scrap. You see OEE, TEEP, MTBF and MTTR in dashboards and over time. In a free 30-minute live demo, you see SYMESTIC applied to your own use case.
Who it is for
Who the OEE guide is for
The guide is for production managers, OpEx teams and plant managers who report OEE and want to be sure it is calculated correctly before they compare machines or set targets. It also helps teams that are about to introduce OEE and want to avoid the usual calculation errors from the start.
How to work with the OEE guide
- 1
Follow the example
Work through the example that runs through the whole guide and recalculate each factor with your own figures.
- 2
Check your calculation
Compare your current calculation with the five common errors and correct the ones that apply.
- 3
Pick the measures
Choose the measures that address your largest factor, from downtime reasons to shorter changeovers.
What to watch when calculating OEE
OEE across machines needs weighting
An average of single OEE values treats a short running machine like one that runs all day. Calculating from the totals of time and quantity gives the right combined value.
TEEP shows unused time
OEE refers to the planned production time. TEEP refers to the full calendar time and shows how much capacity is left in unplanned shifts.
Targets need a stable definition
A target only works when the definition stays the same. When the calculation changes, record the date so the trend is not misread.
Download the OEE guide
Fill in the short form and you receive the download right after.